Features

• Support for HP-UX 10.20 and HP-UX 11.i
• Both 3.3V and 5V PCI support
• Software configuration - no DIP switches
• 16 bit data exchange 
• Extra status and control lines; Choice of handshake methods
• Data-latching options; Selectable data width and polarity.

TAMS 71622 is based on HP’s original definition of the 98622 GPIO standard.  The TAMS card is a superset of the HP/Agilent interfaces and meets all the original specifications.  It can operate with the original code, but also adds the full functionality of the HP E2074/5 enhanced mode to give bi-directional data and auxiliary status and control lines.  Features bi-directional polling and configurable PCTL delay. You can use the TAMS card with any application that was developed for HP/Agilent cards.

Software Compatibility
Whether you are using HP-VEE, BASIC/UX or programming in ‘C’ with the SICL library your code will run at full performance without modification. 

GPIO Cable
Because the TAMS 71622 GPIO card uses a compatible connector, either an existing HP cable or a new cable may be used. A matching ten foot cable with a connector attached to one end and open wires on the other is available to fill various cable and interfacing needs.

System requirements

• 1 available PCI slot
• HP Workstation running HP-UX 10.20 or 11i
• Agilent I/O Libraries (p/n E2091) for use with HP-UX 10.20
• TAMS I/O Libraries Media CD (p/n 72091-0101) for use with HP-UX 11i

Ordering Information